Dissolution Basket

Dissolution basket for tablet dissolution test

Dissolution basket is installed on the dissolution meter, which is a necessary tool for the experimental research of drug preparation dissolution. The basket is made of stainless steel metal materials, and the swing range shall not exceed 0.1mm when the basket is rotated. The most commonly used specifications are 40 mesh. 

Dissolution basket method process 

1. In addition to the other regulations, in the scriptures degassing treatment volume 900 ml, solvent injection within each operating solvent, heating to keep the temperature of the solvent in 37 ℃ + 0.5 ℃, adjust the speed to make it stable.

2. The timing will start immediately. Unless otherwise specified, at 45 minutes, the appropriate amount of solution will be absorbed in the specified sampling point, and the solution will be filtered through a microporous membrane no more than 0.8 times m immediately. The process from sampling to filtration should be completed within 30 seconds.

3. Take the filtrate, measure it according to the method specified in each drug item, and calculate the dissolution amount of each tablet (piece).

Our advantage of dissolution basket

1. High quality, higher cost performance.

We have many years of production experience, coupled with advanced production equipment, to ensure the quality of our products.

Our factory is located in the origin of raw materials, Not only can the quality of raw materials be well controlled, but also the price has a huge advantage over other manufacturers.

2. Custom service

We can produce all the specifications of the product

3. Tolerance control

This is the root of our products all over the world, in terms of tolerance control, we have reached the top of the industry.

4. Cleaning process.

Our cleaning equipment is also developed by us, It is different from ordinary pickling. After cleaning with our special equipment, in addition to the bright surface, also increased the corrosion resistance by about 40%. So our dissolution basket has a longer service life than others.

Shortcomings of the basket

1. Poor mechanical stability. After long-term use of the basket, the wire diameter and mesh will change.

2. Prevents visual inspection (the amount and state of residue in the basket cannot be seen during the experiment).

3. The effects of external shocks, sloshing, and the resistance of the thermometer and the sampling tube are large. Inconvenient to start testing in time sharing

4. Inconvenient cleaning after each measurement

Precautions

When applying the basket method test, attention should be paid to the cleanliness of the basket. Generally, the gap in the basket is observed in the sunlight.

If there is clogging, it can be cleaned by ultrasonic or boiling in dilute nitric acid and then boiled in water, otherwise the accuracy of dissolution will be affected. Especially at low speeds, the effect is more pronounced.

A dry basket should be taken during the test.

In addition to the dissolution basket, the dissolution sinker used in the dissolution tester is also our main product.